The first universal T-Top that folds for fixed bridges and storage, and it's affordable, strong, silent and easy to install. Fishmaster is one of the most experienced marine tower builders in the world with over 10,000 towers and T-Tops shipped to customers worldwide. By combining advanced engineering with volume manufacturing in our ISO 9002 factory we...
Durable Polished and Bright Anodized FinisHolds fishing poles, net, gaff hook or flagSwivel mount and rotating clamp design allow you to position rods at any angle.Constructed from 6063-T6 aluminum and 303 stainless steel fasteners
Replaces bolts for a quicker fold down process.Molded Delrin with Stainless InsertsTwo Packs are RecommendedOne pack needed to fold uprights with one quick release at each joint.One pack needed to fold top section with two quick release on each side.
Durable Reinforced Fiberglass ConstructionGreat for storage and electronics18-8 Stainless Steel FastenersLockable (Two Keys Included)
Same rail used for mounting the electronic box to the Fishmaster T-Top.Allows the customer to mount virtually anything to the Fishmaster T-Top.Mounts above the console and comes with stainless mounting hardware.Using existing holes or drill additional holes to your requirementsSuper strong 1/4" aluminum stamped plate.
Durable Reinforced Fiberglass ConstructionGreat for storage and electronics2 Mounting Brackets & Hardware Included18-8 Stainless Steel FastenersLockable (Two Keys Included)
Protects you against the cold wind and wet weather.Attaches quickly and easily.Custom sewn to fit your T-Top.Constructed with .040 Marine Grade Clear Vinyl.Rolls up for easy storage.Attaches with eleven 2 inch canvas straps with no skid rubber lining to prevent sliding or movement.Measures 41" tall and sewn to the specific width of your t-top.
Protects you against the cold wind and wet weather.Attaches quickly and easily.Custom sewn to fit your T-Top.Constructed with .040 Marine Grade Clear Vinyl.Attaches with 2 inch canvas straps with no skid rubber lining to prevent sliding or movement.Measures 41" tall and sewn to the specific width of your t-top.Match your T-Top canvas. This enclosure is...
Mounts easily to the top section of your Fishmaster T-Top. Huge Storage area - 36" X 18" X 6"Great for Storing Life jackets.Ventilated so that contents inside does not mold or mildew.Several pockets for additional storage.
Gives the fisherman something to hold onto in rough waters or any situation when you need something to grab onto for additional stability.Many accessories can be attached to the 1.66" tubingPolished and anodized to prevent corrosion.All hardware and instructions are included.Can be installed and removed from the boat simply and quickly for easy...
Attaches anywhere on your Fishmaster T-Top.Great for holding on in rough waters.Looks great on your t-top!
Adds additional stability to your t-topAdjustable to work at widths from 24" to 50"Install high or low, front legs or rear legsWorks as a grab handleEasy to installPolished and Anodized tubingStainless Steel Fasteners
Securely fastens to T-Top with 18-8 Stainless Steel Hardware.Facilitates using console mounted rod holders located underneath T-Top by allowing rods to penetrate through the canvas.
Pole Pocket can be used to store Phones, Tools, Glasses, EtcDurable Black Nylon MeshConveniently Store Items Within ReachQuickly Attaches with Velcro StrapsAvailable Individually or as a Package
Beverage Holder Keeps Your Beverage Close and SecureDurable Black Nylon MeshConveniently Store Items Within ReachQuickly Attaches with Velcro StrapsAvailable Individually or as a Package
Trash Tote is Easily Removed and Includes Carrying HandlesDurable Black Nylon MeshConveniently Store Items Within ReachQuickly Attaches with Velcro StrapsAvailable Individually or as a Package
Significantly Increases Frame Stiffness, but Rarely NeededOnly needed for heavily accessorized T-Tops (over 100 lbs) used regularly in very rough water.Beneficial for use on consoles less than 30 inches tall.Includes quick release knobs for quick and easy removal for folding down the T-Top.Can be mounted to the side, front or top of the console.
Use with round base antenna mountsWorks great for mounting the navigation light or the spreader light also.No drilling necessary. Mounts easily to the pre drilled holes on t-top frame.Includes triangular hole pattern for mounting antennas.Super strong 1/4" aluminum stamped plate.
Comes with standard 1"-14 threads.No drilling necessary. Mounts easily to the t-top frame.Super strong polished and anodized aluminum.Stainless Hardware.* Antenna in photo not included.
Mounts easily to the top section of yourT-Top. Pre-Drilled holes in the bracket for attaching your outriggers.Works with all popular outriggers with 3" x 4" centers between holes and 3" main center holeSuper strong polished and anodized aluminum.Stainless Hardware included to attached to your Fishmaster T-Top.
Allows you to mount a folding antenna bracket to the plate and then easily mount both to the T-Top.Swivels to be used on front, rear or sides of the T-TopPolished and anodized aluminum with Stainless Hardware to attach antenna bracket to the plate.Holes are 3" by 1-1/2" on center and compatible with most folding antenna mounts.
Allows you to mount any accessory made to clamp onto a 1 inch railing to the Fishmaster T-topSuper strong polished and anodized aluminum.Stainless Hardware included.
Durable and Bright55 Watt, high intensity Halogen lampView Wiring InstructionsCan be rotated to light behind or inside the boatUniversal Antenna Mounting Brackets recommended for installation. Sold Seperately.Can be mounted directly to T-Top with included U-Bracket
Durable Reinforced Fiberglass Construction16.5" Tall with 32" x 23" DeckDiamond plate non-skid molded deck surfaceTwo rear drain holes.Quick release hold-down for easy removalLegs can be removed for storagePolished and anodized frame and legsStainless Steel Fasteners
12" X 12" anodized aluminum plate for mounting your radar.Mounts easily to the Fishmaster t-top frame or any 1.9" or 2" tubing.Super strong 1/4" aluminum stamped plate.Stainless Steel Hardware
Allows Fishmaster accessories to be used with smaller diameter pipe including 1.66" and 1.32" Outside DiameterCan be used on the Fishmaster Rod Holders, UHF Antenna Mount, Universal 1" Rail Mount, Folding Antenna Mounting Plate and Outrigger Holders.Great for attaching rod holders to the casting platform or platform leaning rail.For rod holders and...
Durable Polished and Bright Anodized FinishHolds OutriggerSwivel mount and rotating clamp design allow you to position rods at any angle.Constructed from 6063-T6 aluminum and 303 stainless steel fasteners.
Universal to fit any PWCCan be used in the front or rearFolds Down or Removes in Minutes for Storage and Trailering.Industry Standard 1.90" Polished and Anodized Tubing. Stainless Steel Hardware.Adjusts from 36" wide to 44" wide.Guaranteed Strong, Stiff & Silent
Adjusts to fit any PWCAllows any size cooler that fits on back of your PWC to be strapped downFolds Down or Removes in Minutes for Storage and TraileringIndustry Standard 1.90" Polished and Anodized Tubing. Stainless Steel Hardware.Adjusts from 40" wide to 48" wide.Guaranteed Strong, Stiff & Silent